-

WELCOME!                                                              
 
Thank you for visiting us!
 
For TL Technology no job is too small or too large. We make all types of electronics and software and we offer following serial production of PCB series on our own machines.
 
We have the capacity to develop and produce equally with the larger electronics companies, as we have chosen to focus on a complete production line with two automatic SMD pick'n place systems, vaporphase solder machine, wavesolder machine as well as a reflow oven. We also produce small prototype series and other smaller productions, where even start-ups can afford.

With us you get the direct contact to the developer and the manufacturer of your product without time consuming intermediaries. It is our experience that when development and production is in the same house, the customer gets a great advantage since any barriers are erased.
 
Do not hesitate to contact us for a talk about your ideas and how we can help you realize them. 



TL EasyInterface
TL EasyInterface
FlexController
FlexController
NEWS!

OCTOBER 2016
After years of development, we can now present our complete programmable control system. We have chosen to call it FlexController, as we have done a lot to make it as flexible as possible. Therefore, we can deliver it as it is customized with all the necessary features to exactly the machine to be controlled. Read more about the FlexController here.


SEPTEMBER 2016 - High Precision Mono Audio DAC - HPMAD1820
Here we present the first version of a new "high-end DIY series" for very discerning DIY people, which we plan to add in our product line. It is a digital to analog converter of very high quality. There are several qualities and price ranges within this category and with HPMAD1820 in all modesty you get the ultimate most accurate and highest performance DAC ever made.


APRIL 2016 - AARating
Again, for the third time, we are proud to be one of the most creditworthy companies in Denmark. Our company has just been awarded with an AAA rating, which is the highest rating you can achieve. The diploma indicates that a company is reliable and creditworthy in the long term.
AAA

JUNE 2016 - New Hardware revision of our TFT Controller board
A new PCB revision for our TFT controller arrived - V2.1.


MARCH 2016 - LISN Network
This is the PCB for our new "home-made" LISN network. It should be used with our spectrum analyzer (Tektronix MDO4104-3) in order to measure EMC noise on our many internal switch mode projects. The idea is to make our products as quiet as possible.



FEBRUARY 2016 - custom build phase analyzer based on our TFT controller board
The picture below shows our TFT Controller in action. It is one of many menu screens in our custom build phase analyzer. It shows a spectrum in a noisy environment, just for test purpose. For more information about the TFT Controller, follow this link.


MAY 2015 - New Yamaha i-Pulse M4S
We have just purchased a new pick'n'place machine. It was a fairly big, but quick decision that we made and it has fortunately proved to be a good investment despite the three-month delay it gave us. It did not run by itself from day one - Obviously we had to create new programs and undergo some training first. The machine runs really stable and assembles about 21,000 components per hour when it goes well. Its error rate is around 0.005% counter to our previous machine which made about 1% error. Translated into human terms, this means that about 1 out of 20,000 components is just a little misaligned.

APRIL 2015 - AARating
We are once again proud to be one of the most creditworthy companies in Denmark. Our company has just been awarded with an AAA rating, which is the highest rating you can achieve. The diploma indicates that a company is reliable and creditworthy in the long term.
AAA


MARCH 2015 - Old PCB shown - a 24bit 48KHz digital stereo audio transmitter for jack male connector
This is one of our many projects that we never could get time to finish. It is an audio transmitter developed for guitar use. We finished the PCB and also most of the software and receiver unit too, but never the enclosure to build it into. The goal was to make a smart transmitter in an auto key like enclosure. The dimension of the PCB is only 48x25mm. Sadly new projects was overruling this one :(


OCTOBER 2014 - New Hardware revision of our TFT Controller board
PCB updated with micro SD-Card slot for dumping pictures, fonts, texts and custom IO commandsets. Also onboard Flash RAM capacity is changed from 16Megabyte to up to 1Gigabyte. DC input range is extended to 3.3 or 5.2-45 Vdc. New version compatible with both resistive (analog) and capacitive (digital) touch panels.




JUNI 2014 - Introducing our Digital Comparator DC12
A programmable signal converter and comparator. It can compare, convert, scale, invert and offset nearly all signal types, both digital and analog.


MAY 2014 - Controlling TFT touch screens - 2,5" - 10"
We are just about to complete our intelligent display controller that allows you to build your own screen menus from scratch in a few minutes. Click the image for more information. Display with controller - see from backside.



APRIL 2014 - AARating
We are proud to be one of the most creditworthy companies in Denmark. Our company has just been awarded with an AAA rating, which is the highest rating you can achieve. The diploma indicates that a company is reliable and creditworthy in the long term.

AAA


MARCH 2014 - New hardware revision of our PIR Sensors.
Our popular PIR detector is now updated with a stronger microprocessor. The software is improved with auto calibrating sensitivity and continuous auto-adjustment of the thresholds as well. In addition a hardware watchdog has been implemented to make a safer restart if dropouts occur on the power grid.



After several years of presenting our company in Danish terms and due to several requests from our foreign partners we are happy to launce our website in English. We look very much forward to serve our costumers abroad!